Induction heating equipment for screws

1. Rapid and Uniform Heating: Utilizing the principle of electromagnetic eddy currents, heat is generated from within the screw, resulting in an extremely rapid heating rate. This ensures uniform heating of the workpiece both internally and externally, reducing oxide scale formation.

2. Minimal Deformation: Due to the short and precise heating time, the heat-affected zone of the workpiece is small, maintaining high dimensional stability and minimizing deformation.

3. Precise Localized Heating: Specific areas of the screw (such as the nut or bolt tip) can be locally heated without affecting overall performance.

4. Online Parameter Monitoring: The equipment can monitor voltage, current, power, and speed data in real time and can be connected to an office network for remote online monitoring, ensuring consistent product quality across batches.

5. Automatic Alarm Mechanism: Upper and lower limits for power output can be preset. If any data anomalies occur, the equipment will automatically stop and issue an alarm to prevent defective products from leaving the factory.

6. No Preheating Required: It can operate immediately upon startup, eliminating the need for prolonged preheating like traditional electric furnaces, significantly increasing production efficiency.

---